Doll Care Instructions

Joint Movement & Poses: The doll contains internal joints and can be posed within a safe range. However, dolls are shipped in a natural upright position and should not be left in extreme or highly bent poses for extended periods, as this may cause deformation or damage.

Surface Cleaning: For dust or dirt, use mild detergents, laundry powder, or body wash. Do not scrub the surface forcefully. After cleaning, air dry naturally and apply the included protective powder evenly on the doll’s body to restore smoothness and a delicate feel.

Bathing Frequency: Bathe the doll every 10–20 days, and apply protective powder afterward to prevent oiling or cracking.

Pressure Marks: Prolonged pressure on one side may leave temporary indentations. Place the pressed area facing upward; most marks will fade after a few days. Deep or excessive pressure may cause permanent marks.

Stain Removal:

1. Clean and dry the stained area.

2. Apply a small amount of color removal paste with a cotton swab evenly on the stained surface.

3. Wait 5–6 hours and wipe off the paste. Repeat if necessary until the stain is mostly removed.

4. After stain removal, clean the area, dry thoroughly, and apply baby powder.
   Note: Color removal is only partially effective; light stains can often be removed, while heavy stains may only be reduced.

Storage & Environment:

• Avoid prolonged direct sunlight. Store in a cool, dry, and clean environment, ideally 5–35°C (41–95°F).

• In cold conditions, use a heating pad to gently warm the doll. Avoid high temperatures or excessive heating time.

• Do not place heavy objects on the doll. Always store lying flat.

• Keep out of reach of children.